Table of Contents
Advertisement
appenDICes
LED states
On Screen Messages
‡
Fan failed:
The projector will switch off automatically.
‡
Over temperature:
The projector will switch off automatically.
‡
Replacing the lamp:
Lamp is approaching the end of its rated life.
Replacement suggested.
Warning: Only use genuine lamps.
Remote control
If the remote control does not work
‡
Check the operating angle of the remote control is within ±15° both horizontally and vertically of on of
the IR receivers on the projector.
‡
Make sure there are no any obstructions between the remote control and the projector. Move to within
7 m (23 ft) of the projector.
‡
Make sure batteries are inserted correctly.
‡
Replace batteries if they are exhausted.
63
English
Advertisement
Table of Contents
