Table of Contents
Advertisement
UseR ConTRols
Quick start-Guide for "Rs232 by TelneT"
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that "Windows Firewall" setting to be disabled in case of "TELNET" function filtering out by laptop/PC.
1.
Start => All Programs => Accessories => Command Prompt.
2.
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 ("Enter" key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
3.
If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key pressed, the
RS232 command will be workable.
58
English
Advertisement
Table of Contents
