Setup / Hdmi Link Settings - Optoma WU465 User Manual

UseR ConTRols

setup / HDMI link settings

HDMI link
Enable/disable the HDMI Link function. The inclusive TV, power on link, and power off link options will only
available if the setting is set to "On".
notee:
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This lets one
device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your
DVD player may be connected to the projector through an amplifier or home theater system.
‡ Optional feature depends on region
‡ Only available on Standby Mode is Active
Inclusive of TV
Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both
devices to be turned off at the same time, set the setting to "No".
power on link
CEC power on command.
‡ Mutuale: Both projector and CEC device will be turned on simultaneously.
‡ pJ -> Devicee: The CEC device will be turned on only after the projector is switched on.
‡ Device -> pJe: The projector will be switched on only after the CEC device is turned on.
power off link
If the setting is set to "On", both HDMI Link and projector will be automatically turned off at the same time. Set to
"Off", both HDMI Link and projector will be not automatically turned off at the same time.
40 English