Table of Contents
Advertisement
UseR ConTRols
7.
Press
8.
Select OSD -> Network -> Lan.
9.
After getting into Network Status, input the following:
±
DHCP: Off
±
IP Address: 192.168.0.100
±
Subnet Mask: 255.255.255.0
±
Gateway: 192.168.0.254
±
DNS: 192.168.0.51
±
DNS2: 8.8.4.4
10.
Press
11.
Open a web browser (ex, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
12.
In the Address bar, input the IP address: 192.168.0.100.
13.
Press
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
For more information, please visit http://www.crestron.com.
56
English
(Menu) button on the projector.
(Enter) button to confirm settings.
(Enter) button.
Advertisement
Table of Contents
