Optoma WU465 User Manual page 29

UseR ConTRols
brightness
Adjust the brightness of the image.
‡ Press ◄ to darken image.
‡ Press ► to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
‡ Press ◄ to decrease the contrast.
‡ Press ► to increase the contrast.
sharpness
Adjusts the sharpness of the image.
‡ Press ◄ to decrease the sharpness.
‡ Press ► to increase the sharpness.
Color
Adjusts a video image from black and white to full color saturation.
‡ Press ◄ to decrease the amount of color in the image.
‡ Press ► to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
‡ Press ◄ to increase the amount of green in the image.
‡ Press ► to increase the amount of red in the image.
Gamma
Choose the Gamma type from Film, Video, Graphics, Standard (2.2), 1.8, 2.0, 2.4.
Color settings
Enter the Image Settings menu. See page 32 for more details.
signal
Enter the Signal menu. Set projector signal properties. The function is available when input source is support VGA.
See page 33 for more information.
brightness Mode
Adjust the brightness mode settings for lamp-based projectors.
‡ brighte: Choose "Bright" to increase the brightness.
eco.e: Choose "Eco." to dim the projector lamp which will lower power consumption and extend the
‡
lamp life.
‡ Dynamice: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
‡ eco+e: When Eco+ mode is activated, the brightness level of the content is automatically detected to
significantly reduced lamp power consumption (up to 70%) during periods of inactivity.
29
English