Table of Contents
Advertisement
Chapter 16: Troubleshooting
Wait until files have been printed before sending additional files to the
printer.
If you print large files or many files at one time, you may want to add
additional memory to the printer. Consult the printer documentation for
instructions for adding additional memory.
You receive a "Printer is out of paper" error message
After adding paper, make sure the printer is online. Most printers have
an online/offline button that you need to press after adding paper.
Sound
You are not getting sound from the speakers
Make sure the Windows volume control is turned up. For more
information, see "Adjusting the volume" on page 70 and "Listening to
CDs" on page 73.
Make sure that
the volume" on page 70 and "Listening to CDs" on page 73.
Video
The external monitor is not working
Make sure that the monitor power is turned on and that the video cable
is correctly connected.
The LCD panel has pixels that are always dark or too bright
This condition is normal and inherent in the TFT technology used in
active-matrix LCD screens. Gateway's inspection standards keep these to
a minimum. If you feel these pixels are unacceptably numerous or dense
on your display, contact Gateway Technical Support to identify whether
a repair or replacement is justified based on the number of pixels affected.
216
is not selected. For more information, see "Adjusting
Mute
www.gateway.com
Advertisement
Table of Contents
Troubleshooting
