Table of Contents
Advertisement
Chapter 11: Upgrading Your Notebook
6
Hold the new or replacement module at a 30-degree angle and press it
into the empty memory slot. This module is keyed so that it can only
be inserted in one direction. If the module does not fit, make sure the
notch in the module lines up with the tab in the memory bay.
Important
7
Gently push the module down until it clicks in place.
8
Replace the memory bay cover and cover screw, insert the battery,
connect the AC adapter, and turn on your notebook.
128
Use only PC100 (100 MHz) or PC133 (133 MHz) memory
modules.
www.gateway.com
Advertisement
Table of Contents
Troubleshooting
