Table of Contents
Advertisement
8
Click
. The Wireless Network Properties dialog box opens.
Add
9
Enter the name of the network. For an access point network, we
recommend entering the name of the access point device followed by
the SSID name found on the back of the access point, for example
RG1000 1ff60a.
10
Click the
Data encryption (WEP enabled)
11
Click to clear the
12
Enter the network key. This key must be the last five digits of the network
name. Example: ff60a.
13
Select
ASCII characters
14
Select
40 bits (5 characters)
15
Select
from the
0
16
Make sure that the
selected.
17
Make sure that the
box is not selected.
The key is provided for me automatically
from the
Key format
from the
Key length
Key index (advanced)
Network Authentication (Shared mode)
This is a computer-to-computer (ad hoc)
www.gateway.com
Using a wireless network
check box.
check box.
list.
list.
list.
check box is not
network check
153
Advertisement
Table of Contents
Troubleshooting
