Gateway Solo 1400 Install Manual
Gateway Solo 1400 Install Manual

Gateway Solo 1400 Install Manual

Installing a cd, cd-rw, dvd, or dvd/cd-rw drive
Hide thumbs Also See for Solo 1400:

Advertisement

Quick Links

Installing a Solo 1400/1450 CD,
CD-RW, DVD, or DVD/CD-RW drive
This package includes a CD, CD-RW, DVD, or combination DVD/CD-RW drive
for your Solo 1400 or Solo 1450 notebook and these printed instructions.
Tools you need
You need a small Phillips and small flat blade screwdriver to install the drive.

Preventing static electricity discharge

The components inside your computer are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD).
Caution
Warning
Before installing the drive, follow these guidelines:
I
Turn off the computer power.
I
Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of the computer.
Warning
I
Touch a bare metal surface on the back of the computer.
I
Unplug the power cord and modem and network cables.
I
Remove the battery.
ESD can permanently damage electrostatic
discharge-sensitive components in the computer. Prevent
ESD damage by following ESD guidelines every time you
open the computer case.
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your computer and unplug the power
cord and modem and network cables before opening the
case.
To prevent risk of electric shock, do not insert any object
into the vent holes of the notebook.
www.gateway.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solo 1400 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gateway Solo 1400

  • Page 1: Preventing Static Electricity Discharge

    CD-RW, DVD, or DVD/CD-RW drive This package includes a CD, CD-RW, DVD, or combination DVD/CD-RW drive for your Solo 1400 or Solo 1450 notebook and these printed instructions. Tools you need You need a small Phillips and small flat blade screwdriver to install the drive.
  • Page 2 Unplug the AC adapter and modem and network cables. Warning Remove the battery. Open the LCD panel to the normal viewing position. To avoid injury, disconnect the AC adapter and modem and network cables before removing the keyboard. Replace the keyboard before reconnecting power. www.gateway.com...
  • Page 3 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive Insert a small flat blade screwdriver under the bottom-right corner of the keyboard bezel, between the I Important Inserting a piece of cloth between the screwdriver and keyboard and notebook case will help prevent damage to your notebook.
  • Page 4 Pull the bezel off the notebook. You will hear small snapping sounds as the bezel comes off the notebook. Be careful not to break off the tabs located on the left end of the bezel. www.gateway.com...
  • Page 5 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive With a small Phillips screwdriver, remove the two keyboard screws and put them in a safe place. www.gateway.com...
  • Page 6 Slowly rotate the keyboard toward you so it lies keys-down on top of the notebook. Be careful not to damage the LCD panel. www.gateway.com...
  • Page 7 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive www.gateway.com...
  • Page 8: Replacing The Drive

    Replacing the drive To replace the drive: With a small Phillips screwdriver, remove the two drive screws and put them in a safe place. www.gateway.com...
  • Page 9 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive Slide the existing drive out of the notebook. www.gateway.com...
  • Page 10 Slide the new drive into the same bay that the existing drive was located in. The drive is inserted properly when the logo on the drive door is right side up. www.gateway.com...
  • Page 11 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive Replace the two drive screws. www.gateway.com...
  • Page 12: Attaching The Keyboard

    Insert the five tabs locate at the front edge of the keyboard into the corresponding slots under the palm rest. Gently press the keyboard down until it is flat all the way across. The keyboard should easily fall into place. Be careful not to damage the LCD panel. www.gateway.com...
  • Page 13 Installing a Solo 1400/1450 CD, CD-RW, DVD, or DVD/CD-RW drive Replace the two keyboard screws. Slide the two tabs located on the left end of the bezel under the notebook frame. www.gateway.com...
  • Page 14 “Replacing the bezel” on page 15. Warning Replace the battery. Plug in the AC adapter and modem and network cables. Turn on the notebook. If the bezel is not correctly replaced, your notebook could be damaged when you try to close the LCD panel. www.gateway.com...
  • Page 15: Replacing The Bezel

    Refer to your user’s guide for important safety, regulatory, and legal information. © 2002 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries.
  • Page 16 MAN US RPL SL1450 OPTC DRV R0 04/02 www.gateway.com...

This manual is also suitable for:

Solo 1450

Table of Contents