Table of Contents
Advertisement
C
ommissioning via Installer for Solar Inverters mobile APP
"Installer for Solar Inverters" is the new advanced ABB mobile APP al-
lows to simplify commissioning, parameter settings and troubleshooting
of ABB string multi-inverters in large scale solar plants.
Even in case of single inverter installation it can be consider the most
suitable professional tool to be used.
"Installer for Solar Inverters" mobile APP is available for mobile devices
with an Android version of 6.0.1 or greather (iOS mobile devices support
will come soon) and could be downloaded and installed from Play Store.
Commissioning procedure:
It's higly recommended to connect the inverters in ethernet daisy chain
(with or without ring) before executing the commissioning procedure.
Make sure that all the inverter being commissioned features the last
firmware version (updating can be executed via Installer for Solar Inver-
ters mobile APP).
• Close the DC disconnect switches
voltage from the photovoltaic generator.
Make sure irradiation is stable and adequate for the inverter commissioning procedure to be
completed.
The main steps to complete the commissioning procedures are listed below:
- Installer for Solar Inverters mobile APP installed on mobile device.
- Enabled Aurora Vision installer account allowed to use the mobile APP
The account can be created in the mobile APP directly following the dedicated
wizard procedure.
- Manual claiming of the inverters to be commissioned.
The claiming process consists of indicating which inverters are to be commis-
sioned.
Claiming process can be executed by scanning the QR codes of all the inver-
ters being worked and putting the selected inverters into the working list. Please
insert in the list inverters belonging to the same inverters family; no more than
40 inverters by time can be configured together.
to supply the inverter with input
15
- 94 -
7 - Operation
Advertisement
Table of Contents
