Ethernet Bus Connection - ABB PVS-50-TL Product Manual

E
thernet bus connection
By default the 2 Ethernet ports of the inverters are already configured for
enabling communication over daisy chain layout.
Once physically connected the inverters do not need specific settings: af-
ter the first time the inverter is turned on, the inverters automatically get all
needed network parameters with or whitout the presence of DHCP server.
If an internet connection is available on site the inverters are automati-
cally configured to transmit telemetry data to Aurora Vision Cloud without
the need of installing any additional devices (logging capability are alre-
ady integrated into the inverter by default)
Aurora Vision Plant Management platform is the ABB cloud solution allowing customer to
remotely monitor and manage its own solar plants. Please refer to http://new.abb.com/power-
converters-inverters/solar or contact ABB technical support for further information on how get-
ting an Aurora Vision account
With the inverters connected over Etherneth daisy chain and with an
available internet connection it will be always possible, via Aurora Vision
Cloud, to upgrede remotely the firmware of the inverters.
In order to improve the communication services and allow reaching of
all the inverters in the chain also in presence of fault it is reccomended
to create a ring shape layout by connecting both the first and the last in-
verters of the chain to the local Ethernet switch( as shown in the picture)
Mixed Wireless / Ethernet connection
IP given by inverter
DHCP server
Direct Access
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
IP given by router
DHCP server
Please refer to chapter 5 for further information about the installation.
IP given by inverter
DHCP server
Direct Access
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
IP given by router
DHCP server
Customer router
- 41 -
2 - Characteristics
IP given by inverter
DHCP server
Direct Access
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
IP given by router
DHCP server
IP given by router
DHCP server