Communication Connection Diagrams; Communication Interface; Accessing To Web Server - ABB PVS-50-TL Product Manual

C
ommunication connection diagrams
C
ommunication interface
A
ccessing to web server
When prompted, type the "product key" (including the dashes: Example 1234-1234-1234-
1234) as the network password to access the inverter's access point. The product key is
printed on the "wireless identification label" located on the side of the inverter..
The communication connection diagrams shows how the integrated ethernet
and wireless board allows the locally or remotely connection to the inverter.
The inverter provide the following communication interface:
- Integrated Wi-Fi channel (IEEE 802.11 b/g/n@2.4GHz)
The use is recommended to access wiressely to embedded web ser-
ver by using any WLAN standard device (PC, tablet. smartphone) for
commissioning and parameter setting
- 2x Ethernet ports (10/100BaseTx - external RJ45 plugs)
The ports are configured by default for enabling daisy chain connec-
tion of the inverters over the Ethernet bus.
In order to improve the reliability of the communication with the inver-
ters it is also allowed to create ring shape layout by using this Ethernet
bus
- 3x RS485 ports (internally located)
Mainly recommended for replacement of old product or service opera-
tions.
The recommended way to access to the inverter web server is the Wi-Fi

communication interface.

Any standard WLAN devices with a common browser can be used for
this purpose.
• Once powered, the inverter will automatically create a wireless network
(approx. 60 seconds after its switch-on) that will be visible as an Access
Point from the user devices previously mentioned (tablet, smartphone,
etc.).
• Enable the wireless connection on the device which is being used
for the board setup (tablet, smartphone or PC) and connect it
to the Access Point created by the inverter system: the name of
the wireless network created by the system that the connection
should be established with, will be: ABB-XX-XX-XX-XX-XX-XX
where "X" is a hex digit of the wireless MAC address (MAC address
can be found on the "Communication Identification Label" placed on the
side of the inverter).
• When required Input the network password PRODUCT KEY
The access to the web server is allowed by user account and admin
account (both protected by password) defined during the commissioning
procedure.
In order to recover the user/admin password push "forgot password" but-
ton and follow the procedure.
- 40 -
2 - Characteristics