Checking The Connection (Network); Checking The Software And Data - Epson Workforce Pro WF-C8190 Series User Manual

User's Guide
❏ If the printer cannot print using a USB connection, try the following.
Disconnect the USB cable from the computer. Right-click on the printer icon displayed on the computer, and
then select Remove Device. Next, connect the USB cable to the computer and try a test print.
Re-set the USB connection by following the steps in this manual for changing the connection method to a
computer. See the related information link below for details.

Checking the Connection (Network)

❏ Select Settings > General Settings > Network Settings > Connection Check, and then print the network
connection report. If the report shows that network connection has failed, check the network connection report
and then contact your printer administrator.
❏ If the problem cannot be cleared, contact your printer administrator.

Checking the Software and Data

❏ Make sure that a genuine Epson printer driver is installed. If a genuine Epson printer driver is not installed, the
available functions are limited. We recommend using a genuine Epson printer driver. See the related
information link below for details.
❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower
resolution or a smaller size.
Related Information
"Checking for Genuine Epson Printer Drivers" on page 117
&
Checking for Genuine Epson Printer Drivers
You can check if a genuine Epson printer driver is installed on your computer by using one of the following
methods.
Windows
Select Control Panel > View devices and printers (Printers, Printers and Faxes), and then do the following to
open the print server properties window.
Solving Problems
117