Xerox Phaser 6700V/DX User Manual page 93

Note: The rollers are located approximately 165 mm (6.5 in.) inside the printer, measuring from the
tray opening.
b. Pull the feed roller hook out of the groove on the axle, then slide the feed roller to the front.
c. Remove the second feed roller using a similar method.
d. Align the hole of the new feed roller with the axle.
e. Slide the feed roller along the axle until the protrusions fit completely into the slots, and the
roller hook reseats into the groove.
Maintenance
Phaser 6700 Color Printer
User Guide
93