B Preparation
Connecting the Projector
Notes
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connecting a Computer
Connection with a computer is explained for each input signal.
INPUT A
For connecting a computer with an RGB output terminal.
Computer
Note
It is recommended that you set the resolution of your computer to 1920 × 1200 pixels (VPL-FHZ66/
FHZ61/FHZ58) or 1280 × 800 pixels (VPL-FWZ65/FWZ60) for the external monitor.
INPUT B
For connecting a computer with a DVI-D output terminal.
Computer
Mini D-sub 15-pin
RGB output
cable
terminal
(not supplied)
Audio output
terminal
Audio cable
(Stereo mini plug)
(not supplied)
DVI-D output
DVI-D cable
terminal
(not supplied)
Audio output
terminal
Audio cable
(Stereo mini plug)
(not supplied)
9