Using The E-Mail Report Function - Sony VPL-FHZ61 Operating Instructions Manual

Using the e-mail Report
Function
Set the e-mail report function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1
Click on [ Owner information
the owner information recorded in the
mail report.
Owner information button
2
Set the timing of the e-mail report.
Click on [Advanced Menu] to display
the [E-mail] button, then click on [E-
mail] to open the E-mail page.
Maintenance Reminder: Set the timing
for maintenance. To reset
Maintenance Reminder, check the
RESET check box and then click on
[Apply].
E-mail button
] to enter
e-
1
3
Enter the outgoing e-mail address in
the Email Address box then check the
Report Timing check box of the e-mail
report to be sent.
4
Set the mail account for sending e-
mail reports.
Mail Address: Enter the e-mail address.
Outgoing Mail Server (SMTP): Enter
Required Authentication: Check this
Requires the use of POP
Incoming Mail Server (POP3): Enter
Account Name: Enter the mail account.
Password: Enter the password.
SMTP Authentication: Check this
43
2
4
6
5
the address of outgoing mail server
(SMTP).
check box if authentication is required
for sending e-mail.
Authentication before send email
(POP before SMTP): Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.
the address of the incoming-mail
server (POP3) to be used for POP3
authentication.
check box to arrange for SMTP
3