Default Fax Settings; Operation Method - Kyocera ECOSYS M2635dn Operation Manual

Fax Settings > Default fax settings

Default fax settings

This section explains the fax settings in the system menu.

Operation method

Select the [System Menu/Counter] key to show the settings on the message display. Then, select from the settings
displayed.
Operation Method (page 2-6)
1
NOTE
If the login user name entry screen appears during operations, log in by referring to the machine's Operation Guide for
Administrator User Name and Password.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2635dn/ECOSYS M2635dw
ECOSYS M2540dn/ECOSYS M2540dw
If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
Refer to System Menu Settings on the following page and configure as needed.
2
3
4
Login User Name
3500
4000
8-2
1 Displays the System Menu items.
2 Selects the item displayed or changes
the numeric value.
3 Confirms the selected setting.
4 Cancels the current menu setting to
return to the menu one level higher.
Login Password
3500
4000