TYAN Tempest i5100T Manual page 61

3.11.2 South Bridge Configuration Sub-Menu
This menu gives options for customizing South Bridge Chipset settings. Select a
menu by highlighting it using the Arrow ( / ) keys and pressing Enter. The
settings are described on the following pages.
Main Advanced
South Bridge Chipset Configuration
HDA Controller
SMBUS Controller
SLP_S4# Min. Assertion Width
Restore on AC Power Loss
Onboard VGA
Chassis Intrusion Detect
Feature
South Bridge Chipset Configuration
HDA Controller
SMBUS Controller
SLP_S4# Min.
Assertion Width
Restore on AC Power
Loss
Onboard VGA
Chassis Intrusion
Detect
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[Enabled]
[1~2 seconds]
[Power Off]
[Enabled]
[Disabled]
Option
Enabled
Enable or disable HDA controller
Disabled
Enabled
Enable or disable SMBUS controller
Disabled
4-5 seconds
3-4 seconds
Select Timing for SLP_S4#
2-3 seconds
1-2 seconds
Power Off
Configure how the system board
Power On
responds to a power failure.
Last State
Enabled
Enable or disable Onboard VGA
controller
Disabled
Enable/Disable the function of chassis
Disabled
intrusion detect. When chassis open
event is detected, BIOS will record the
Enabled
event.
61
Security Chipset
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit