TYAN Tempest i5100T Manual page 47

3.7.9 Hardware Health Configuration Sub-Menu
You can use this screen to view the Hardware Health Configuration Settings.
Use the up and down arrow ( / ) keys to select an item. Use the Plus and
Minus (+/-) keys to change the value of the selected option. The settings are
described on the following pages.
Main Advanced
Hardware Health Configuration
H/W Health Function
Auto FAN Power Control
FAN Fail LED Indicator
Hardware Health Event Monitoring
Mainboard Voltages Report
CPU Temp.
Current Fans PWM
Ambient1 Temp. (Near Memory)
Ambient2 Temp. (Near NB)
FAN1 Speed
FAN2 Speed
FAN3 Speed
FAN4 Speed
FAN5 Speed
FAN6 Speed
FAN7 Speed
FAN8 Speed
Feature
Hardware Health Configuration
H/W Health Function
Auto FAN Control
PWM Minimal Duty
Cycle
FAN Fail LED Indicator
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[Disabled]
[Disabled]
:28/63
:xx C/ xxx F
:xx C/ xxx F
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
Option
Enabled
Enables Hardware Health Monitoring Device.
Disabled
FAN power duty cycle is auto dynamic
Disabled
programmed in selected temperature range.
Disabled: Fan Power On.
Enabled: Fan Power Duty Cycle=30%(40°C)-
Enabled
100%(60°C), see max (CPU0, CPU1)
This item allows you to set minimum PWM Duty
30%
Cycle.
40%
Note: This item is hidden and will appear when
Auto FAN Power Control is set to [Enabled].
30%
Disabled
Enabled: Any FAN speed less than 800 RPM,
the FAN Fail LED will be lighted.
Enabled
Security
Enables Hardware
Health Monitoring
Device.
← → Select Screen
↑↓ Select Item
+/-
Tab Select Field
F1
F10 Save and Exit
ESC Exit
Description
47
Chipset Exit
Change Option
General Help