Table of Contents
Advertisement
3.7.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
Main
Advanced
IDE Configuration
SATA Configuration
Configure SATA as
SATA0 (PM)
SATA1 (SM)
SATA2 (PM)
SATA3 (SM)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Feature
IDE Configuration
SATA Configuration
Configure SATA as
Hard Disk Write Protect
IDE Detect Time Out
(Sec)
BIOS Setup Utility
PCI/PnP
Boot
[Enhanced]
[IDE]
[Disabled]
[35]
Option
Enhanced
This defines the operation mode of
SATA channel.
Compatible
IDE
Select legacy IDE, RAID or AHCI as the
RAID
SATA interface.
AHCI
Enable/Disable device write protection.
Disabled
This will be effective only if device is
Enabled
accessed through BIOS.
0~35
Select the time out value for detecting
(at 5 interval)
ATA/ATAPI device(s).
34
Security
Chipset
Select whether the IDE
channels should be
initialized in Compatible
or Enhanced mode of
operation.
← → Select Screen
↑↓ Select Item
+/-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Description
Exit
Advertisement
Table of Contents
