Table of Contents
Advertisement
User's Guide
Note:
❏ Distinctive ring services, offered by many telephone companies (the service name differs by company), allows you to
have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one
number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in DRD.
❏ Depending on the region, On and Off are displayed as the DRD options. Select On to use the distinctive ring feature.
7. On the Receive Mode Setting screen, select whether you are using your phone device connected to the printer.
❏ When connected: Press Yes, and go to the next step.
❏ When not connected: Press No and go to step 9. Receive Mode is set to Auto.
8. On the Receive Mode Setting screen, select whether you want to receive faxes automatically.
❏ To receive automatically: Press Yes. Receive Mode is set to Auto.
❏ To receive manually: Press No. Receive Mode is set to Manual.
9. On the Confirm Settings screen, check the settings you made, and then press Proceed.
To correct or change settings, press the
10. Press Start to run the fax connection check, and when the screen prompts you to print the check result, press
x
the
button.
A report of the check result that shows the connection status is printed.
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type. When you are connecting the printer to a PBX phone
system or terminal adapter, select PBX.
❏ If the Select Dial Tone Detection screen is displayed, select Disable.
However, setting this to Disable may cause the printer to skip the first digit of a fax number when dialing and send
the fax to the wrong number.
Related Information
"Connecting the Printer to a Phone Line" on page 89
&
"Setting Receiving Mode" on page 100
&
"Making Settings for a PBX Phone System" on page 93
&
"Fax Settings" on page 32
&
Making Basic Fax Settings Individually
You can make fax settings without using the fax setting wizard by selecting each setting menu individually. The
settings configured using the wizard can also be changed. For more details, see the list of menus in fax settings.
Related Information
"Fax Settings" on page 32
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
Faxing
y
button.
93
Advertisement
Table of Contents
