Table of contents Table of contents General information..........................5 1.1 Further information........................... 6 1.2 Notational conventions........................7 1.3 Symbols and signal words....................... 7 Safety instructions............................. 9 Features............................... 12 Installation..............................13 Technical specifications........................21 Protecting the environment......................23 LB-3 lighting stand...
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. LB-3...
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
General information 1.2 Notational conventions This manual uses the following notational conventions: Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: Switch on the device. Press [Auto]. ð...
Page 8
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
Safety instructions Safety instructions Intended use This light stand is intended to be used for the stable mounting and height-adjustable posi‐ tioning of spotlights. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage.
Page 10
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product.
Page 11
Safety instructions CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property...
Features Features Complete lighting stand set consisting of – two truss beams – two lighting stands – two truss holder suitable for mounting of up to eight spot lights or effects Extension tubes secured by safety bolts Truss tube diameter: 18 mm Stand tube diameter: 28 mm maximum load capacity: 60 kg maximum height: 3.18 m...
Installation Installation Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Page 14
Installation CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage.
Page 15
Installation WARNING! Risk of falling when mounting the truss or the spotlight When falling off an unsuitable climbing assistance, you could be injured or be caught by falling objects. Use a suitable working platform or a sturdy ladder for mounting a truss or a spot‐ light.
Page 16
Installation Comply with regulations When installing and operating, make sure to follow the standards and regulations that apply in your country. LB-3 lighting stand...
Page 18
Installation Unfold the feet of the stands until the cross braces are in a horizontal position. Fix this position with the safety screw on the slider to which the three feet are attached. Screw the two truss parts with the three supplied hex screws and nuts. LB-3 lighting stand...
Page 19
Installation Insert the two truss holders into the extension tubes of the two tripods and fix the adapter with the mounting screw. Attach the mounted truss beam and fix it in the desired position with the wing nuts. LB-3 lighting stand...
Page 20
Installation Loosen the two screws on the extension tubes. Pull out the extension tubes of the two stands to the desired height and fix both with the help of the locking screw on the stand. Mount up to eight effects or spot lights to the truss beam. Arrange the devices as bal‐ anced as possible.
Technical specifications Technical specifications Height, max. 3.18 m Total width 3.91 m Adjustable stand height 2.12 m … 3.18 m Footprint per stand Æ 1.21 m Single truss length 1.50 m Truss tube diameter Æ 18 mm Stand tube diameter Æ...
Page 22
Technical specifications Weight 22.5 kg Colour Black ( (item no. 485708) Silver (item no. 369941) Further information Stand type Back ground kit Incl. truss beam Crank LB-3 lighting stand...
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the Stageworx LB-3 and is the answer not in the manual?
Questions and answers