Table of contents Table of contents General information..........................4 1.1 Further information........................... 5 1.2 Notational conventions........................6 1.3 Symbols and signal words....................... 6 Safety instructions............................. 8 Features............................... 11 Operating..............................12 Technical specifications........................17 Protecting the environment......................19 LS-300...
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. lighting stand...
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
General information 1.2 Notational conventions This manual uses the following notational conventions: Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: Switch on the device. Press [Auto]. ð...
Page 7
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions Safety instructions Intended use This light stand is intended to be used for the stable mounting and height-adjustable posi‐ tioning of spotlights. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage.
Page 9
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product.
Page 10
Safety instructions CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property...
Features Features Special characteristics: Sturdy metal construction with two telescopic tubes Mounting for truss beam with TV spigot Soft-stop spring mechanism GS certified Extension tubes secured by undetachable safety bolts Maximum weight-bearing capacity: 45 kg Maximum height: 2.80 m LS-300...
Operating Operating Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Page 13
Operating CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage.
Page 14
Operating NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.
Page 15
Operating Setting up Unfold the feet of the stand until the cross braces are in a horizontal position. Fix this position with the safety screw on the slider to which the three feet are attached. If you want to install a truss beam: Loosen the safety screw on the mounting for the truss beam at the top end of the stand, attach the TV spigot (28 mm adapter) and tighten it with the locking screw at the mounting;...
Page 16
Operating Dismounting Remove the safety bolt at the upper and lower tube clamp. Loosen the safety screw on the lower tube clamp and slide the lower extension tube all the way down. Tighten the safety screw on the lower tube clamp. Loosen the safety screw on the upper tube clamp and slide the lower extension tube all the way down.
Technical specifications Technical specifications Height, max. 2.80 m Adjustable tripod height 1.63 m … 2.80 m Stand footprint Æ 1.28 m Stand tube diameter Main tube Æ 42 mm Æ 35 mm Tube first telescope extension Tube second telescope extension Æ 30 mm Mounting options Flange, Æ...
Page 18
Technical specifications Further information Stand type Lighting stand Incl. truss beam Crank lighting stand...
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the STAIRVILLE LS-300 and is the answer not in the manual?
Questions and answers