Advertisement
Quick Links
Scope of delivery
Crossbar
Left and right side panel
Assembly instructions
For mounting the SP-320 stand, use the
supplied furniture locks M6 (A), cap screws (B),
plastic caps (C) and hand screws (D).
Use a soft padding to prevent damages to
the surfaces.
1. Place the furniture locks (A) into the provided
blind holes in the cross bar. Make sure that the
furniture locks are positioned so that the
connecting screws can be inserted and fastened.
2. Place the cap screws (B) into the provided blind
holes of the side panels.
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
SP-320 Stand
A: 4 × furniture lock M6
B: 4 × cap screw M6×40
C: 8 × plastic caps
D: 4 × hand screws M5×25
DocID: 399665_08.12.16
Advertisement
Related Manuals for thomann SP-320 Stand
Summary of Contents for thomann SP-320 Stand
- Page 1 2. Place the cap screws (B) into the provided blind holes of the side panels. Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de DocID: 399665_08.12.16...
- Page 2 In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad oor protectors or a carpet. Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de DocID: 399665_08.12.16...
Need help?
Do you have a question about the SP-320 Stand and is the answer not in the manual?
Questions and answers