Table of Contents
Advertisement
Product Features
Front Panel:
Rear Panel:
1
Gigabit Ethernet Ports: These 16 twisted-pair RJ-45 ports support auto-negotiable
10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true "plug and
play" capability. There are two green LEDs per RJ-45 port. The left LED blinks when the port
is active. The right LED is off at 10 and 100 Mbps and lights up at 1000 Mbps, remaining lit
while at that speed.
Note: Not compatible with PoE (Power Over Ethernet) applications.
2
Power ON/OFF LED: An LED illuminates to indicate that the switch is receiving power.
3
NEMA 5-15R Outlets: This switch includes eight NEMA 5-15R receptacles.
4
Circuit Breaker: If the current drawn by the equipment connected to the PDU exceeds the
Maximum Load Rating, the 12A thermal circuit breaker will trip to prevent possible damage
and its plunger will pop up. If this happens, disconnect excess equipment and allow the
breaker to cool at least one minute before depressing the plunger to reset the unit.
5
Input: AC power input from a connected UPS system or alternate source.
6
Grounding Lug: Use this screw to connect your switch to ground.
16-05-214-9332E0.indd 4
1
2
3
4
4
5
6
5/18/2016 10:27:27 AM
Advertisement
Table of Contents
