Table of Contents
Advertisement
Product Specifications
Model
Overall
Width
MJ71-190
2.0m (6' 6")
MJ71-240
2.5m (8' 2")
MJ71-340
3.48m
MJ71-400
4.16m
MJ71-540
5.54m
Tractor Requirements
It is the operator's responsibility to ensure that the tractor is suitable for the machine. Always consult your tractor's
manual for any further information required.
Recommended Horse Power requirements for the particular models are provided in the "Product Specification" section
of this booklet. Using excessive power can affect the quality of cut and/or may damage the machine.
Tractors which are not suitable for the operation can sustain damage due to the weight and power requirements of
the machine. Always observe the weight of machine provided in the "Product Specification" section of this booklet,
compare this with the guidelines from the tractor manual and ensure that the tractor can lift the machine safely.
The machine is designed to be attached by means of a 3 point linkage connection. The position of the machine can be
adjusted by manual or hydraulic top link.
Winged models require one hydraulic spool with 1/2" female quick release connection for a single acting ram/rams.
Road light kit requires a 12V 7 pin socket.
The machine is propelled by using a standard 6 spline 1-3/8" PTO shaft (provided with the machine).
2
Working
Transport
Width
Width
1.9m (6' 3")
2.00m (6' 6") 25-70
2.40m (8')
2.50m (8' 2") 30-80
3.40m
1.90m
4.00m
1.90m
5.40m
1.90m
www.major-equipment.com
Power
PTO rpm
Cutting
(HP)
Height
(mm)
540
10-150
540
10-150
40-90
540
10-150
50-100
540
10-150
50-100
540
10-150
Rotors/
Weight
Blade
Blades
(kg)
tip
speed
(m/s)
3/6
465
75
4/8
570
75
5/10
940
75
6/12
1100
75
8/16
1270
75
Mowing
Rates
(Acres/hr
at 7mph)
5.3
6.7
9.5
11.4
15.1
Advertisement
Table of Contents
