Backlight Setting; Contrast Setting; Initial Setting (For Administrator) - Fujitsu UTY-RNRYZ5 Operation Manual

3-8-2 Backlight Setting

(1) Touch the [Backlight Setting]
on the "Preference" screen.
Enable or disable the backlight
(2) "Backlight Setting" screen is displayed. Touch the [En-
able/Disable] on the "Backlight Setting" screen.
(3) "Enable/Disable" screen is displayed. Select the [Enable]
or [Disable].
(2)
Backlight Setting
Enable/Disable
Automatic Off Time
Brightness
Cancel OK
When the [OK] is touched, the display returns to the
"Backlight Setting" screen.
NOTE
When set to "Disable", [Automatic Off Time] and [Bright-
ness] setting are unnecessary.
Set the time until backlight is turned off
(4) Touch the [Automatic Off Time] on the "Backlight Set-
ting" screen.
(5) "Automatic Off Time" screen is displayed. Select the [60
sec.] or [30 sec.].
(4)
Backlight Setting
Enable/Disable
Automatic Off Time
Brightness
Cancel OK
When the [OK] is touched, the display returns to the
"Backlight Setting" screen.
Adjust the brightness of Backlight
(6) Touch the [Brightness] on the "Backlight Setting" screen.
(7) "Brightness" screen is displayed. Adjust the brightness
with the [ ] or [ ].
(6)
Backlight Setting
Enable/Disable
Automatic Off Time
Brightness
Cancel OK
When the [OK] is touched, the display returns to the
"Backlight Setting" screen.
Apply the setting
(8) After setting is complete,
touch the [OK] on the "Back-
light Setting" screen.
After the setting change is
displayed, the display returns
to the "Preference" screen.
En-17
Preference
Panel
Calibration
Contrast
Back
(3)
Enable/Disable
[Enable]
Enable
[30s]
Disable
[2]
Cancel
(Cannot be set) Go to (8).
(5)
Automatic Off Time
[Enable]
60s
[30s]
30s
[2]
Cancel
(7)
Brightness Brightness
[Enable]
3
2
[30s]
1
[2]
Cancel Cancel
Backlight Setting
Enable/Disable
Automatic Off Time
Brightness
Cancel

3-8-3 Contrast Setting

(1) Touch the [Contrast Setting] on the "Preference" screen.
(2) "Contrast Setting" screen is displayed. Adjust the con-
Backlight
Setting
trast with [ ] or [ ].
(1)
Preference
Panel
Calibration
Contrast
Back
When the [OK] is touched, after the setting change
screen is displayed, the display returns to the "Prefer-
ence" screen.

3-9 Initial Setting (for administrator)

Perform this setting at installation. The setting can also be
changed after installation.
OK
(1) Touch the [Initial Setting] on the "Main Menu" screen.
(2) When "Password Verification" screen is displayed, enter
the Password (or Installer Password) and touch [OK].
(1)
Main Menu
Special Setting
Preference
Monitor
(3) If the password is entered correctly, the "Initial Setting"
screen is displayed. The screen has 3 pages which are
switched by touching the [Next Page] or [Previous Page].
Initial Setting
Language Setting
Temp. Unit
Setting
Back
OK
Initial Setting
R.C. Master/
Slave Setting
Lead Lag
Setting
Back
The following contents are set. (♦: for installer)
(*: Items that indoor unit does not support are not dis-
played.)
• Language Setting:
The displayed language is switched. The displayable
languages are English (factory setting), French, Ger-
man, Spanish, Polish, Russian, Italian, Greek, Portu-
guese, Turkish, and Dutch.
OK OK
• Date Setting:
The date and time display format are set. When the
power is turned off, the date and time data hold time
by built-in battery is approximately 7 days. When the
power is turned off for longer than this, the date and
time must be reset.
• Temp. Unit Setting:
[Enable] The temperature display unit is switched to "°C" or "°F".
Factory settings is "°C".
[30s]
• R.C.Group Name Setting:
[2]
The remote controller group name can be set or
OK
changed.
(2)
Contrast
Backlight
Setting
Cancel
(2)
Password Verification
Page 2/ 3
Enter Current Password
Summer Time
Setting
CL
Initial Setting
Previous Next
Cancel
Page Page
Page 1/ 3 Initial Setting
R.C. Sensor
Date Setting
Setting
R.C.Group
Password Setting
Name Setting
Next
Back
Page
Page 3/ 3
I.U. Display
Number Setting
Previous
Page
5
4
3
2
1
OK
0 1 2 3 4
5 6 7 8 9
OK
Page 2/ 3
Master Indoor
Unit Setting
Display Item
Setting
Previous Next
Page Page