On And Off; Operation Settings; Set The Operation Mode; Set The Temperature - Fujitsu UTY-RNRYZ5 Operation Manual

2 CONTROL
2-1 On and Off
(1) Press the [On/Off] button.
Mode Set Temp.
26.0 26.0
Cool
°C °C
Status
On/Off button
The Power indicator lamp remains lit while the indoor
unit is operating.
NOTE
The On/OFF button cannot be operated at screens other
than the monitor mode screen.
2-2 Operation Settings
2-2-1 Set the Operation Mode
(1) Touch the [Mode] on the monitor mode screen.
(2) "Mode" screen is displayed. Select the operation mode.
(1)
Mode Set Temp.
26.0 26.0
Cool
°C °C
Status
Depending on the model of
the indoor unit, [Custom Auto]
is displayed instead of [Auto].
NOTES
• Only selectable modes are displayed. The select-
able modes may be different depending on the
system configuration and operation status. Refer
to [4.OPERATION TIPS]→[4-1 Selectable modes].
• When the "Fan" is se-
lected, the temperature
cannot be set.
• [Auto] or [Custom Auto] mode can be used in the
R.C. Group to which Master Indoor Unit is set. It is
not displayed at other R.C. Group.
• When the operation mode is switched in a heat
recovery system, operation preparations may take
some time, but this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-7
Fri 10:00AM
Fan
Auto
Power indicator lamp
Menu
(2)
Mode
Fri 10:00AM
Fan
Cool Dry
Auto
Auto Fan
Cancel
Menu
Mode Set Te
26. 26.0 Dry
Custom
Auto
Fan
Mode Set Temp.
Fan
2-2-2 Set the Temperature
(1) Touch the [Set Temp.] on the monitor mode screen.
(2) "Set Temp." screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
(1)
Mode
When the operation mode is
set to [Custom Auto], set the
cooling and heating tempera-
ture.
NOTES
• The settable temperature range is different depend-
ing on the operation mode. Refer to [4 OPERA-
TION TIPS]→[4-3 Selectable Temperature Range].
• When the "Set Temp. Range Setting" is set, the se-
lectable temperature conforms to the setting. Refer
to [3 SETTING] → [3-6 Special Setting] → [3-6-3
Set Temp. Range Setting].
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-3 Set the Fan Speed
(1) Touch the [Fan] on the monitor mode screen.
(2) "Fan" screen is displayed. Select the fan speed with the
Heat
[ ] or [ ].
(1)
OK
Mode
Heat
°C
Custom
Auto
(3) When the [OK] is touched, the display returns to the
OK
monitor mode screen.
Fri 10:00AM
Fan
Auto
Status Menu
Fri 10:00AM
Set Temp.
Fan
26.0 26.0
Cool Auto
°C °C
Status Menu
Fri 10:00AM
Set Temp. Fan
26.0 26.0
Cool Auto
°C °C
Status Menu
(2)
Set Temp.
26.0 26.0
°C °C
Cancel OK
Set Temp.
Cool Heat
28.0 20.0
°C °C
Cancel OK
(2)
Fan
Auto
Cancel OK