Sharp XL-DV484W Operation Manual page 48

Hide thumbs Also See for XL-DV484W:
Table of Contents

Advertisement

XL-DV484W
Video CD playback (continued)
XL-DV555W
ENGLISH
To interrupt playback:
Press the 6 / STILL button on the remote control.
To resume playback from the same point, press the 0 button.
To stop playback:
Press the H button.
To exchange to other disc whilst playing:
Press one of the s 1 - s 5 buttons to select a tray and within 5 seconds,
press the 7 OPEN/CLOSE button and exchange discs.
To remove the discs:
Whilst in the stop mode, press one of the s 1 - s 5 buttons and within 5 seconds,
press the 7 OPEN/CLOSE button.
Notes:
I Playback control allows a video CD to be played back according to
instructions recorded on the disc. The "previous", "next", "return" and "select"
operations may function differently, depending on the CD.
I Some video CDs with playback control may have an "auto pause". When
such a disc is played, the playback will stop automatically at the point where
an "auto pause signal" has been inserted.
I If the picture is noisy when a video CD is played back, there may be a
scratch on the video CD.
E-45
*DV484W_EP43-46
45
Caution:
I Do not place two discs in one disc tray.
I Do not play discs with special shapes (heart or octagon-shaped). It may
cause malfunctions.
I Do not push the disc tray whilst it is moving.
I Do not move the disc tray by hand. This may cause malfunctions.
I If the power fails whilst the tray is open, wait until the power is restored.
I If the disc tray is stopped with force, "ER-CD20" will appear on the display
for 3 seconds and the unit will not function. If this occurs, press the ON/
STAND-BY button to enter the power stand-by mode and then turn the
power on again.
I If TV or radio interference occurs during CD operation, move the unit away
from the TV or radio.
I If a disc is damaged, dirty, or loaded upside down, the disc will not play.
To play without activating the playback control
H
function (video CDs with P.B.C. only)
You can play a video CD with P.B.C. without activating the playback control
function.
In this case, the menu screen will not appear, and the disc will be played in the
same way as a video CD without P.B.C.
Whilst in the stop mode, press the 2 4 PRESET W W W W W ( 2 /
4 ) button to cancel the P.B.C. mode and press the 0 button
to start playback.
Notes:
I The P.B.C. function cannot be cancelled during playback.
I Some video CDs with P.B.C. cannot be played back when the P.B.C. mode
is off.
I P.B.C. is activated automatically after playback.
04.2.20, 17:25
XL-DV484W(Z)
TINSZA032AWZZ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-dv555w

Table of Contents