Table of Contents
Advertisement
XL-DV484W
System connections (continued)
XL-DV555W
ENGLISH
Aerial connection
H
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM
aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach
it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
ANTENNA
AM
LOOP
FM
GND
75 OHMS
75 ohm
coaxial
cable
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
E-11
*DV484W_EP10-16
11
Speaker connection
H
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+)
terminal.
Caution:
I Use speakers with an impedance of 6 ohms or more, as lower impedance
speakers can damage the unit.
I Do not mistake the right and the left channels. The right speaker is the one
on the right side when you face the unit.
I Do not let the bare speaker wires touch each other.
I Do not allow any objects to fall into or to be placed in the bass reflex ducts.
I Do not stand or sit on the speakers. You may be injured.
< Attaching to the wall >
Wall
Screws (not supplied)
Speaker grilles are removable
H
Make sure nothing comes into contact with the
speaker diaphragms when you remove the speaker
grilles.
External
FM aerial
Incorrect
04.2.20, 17:21
XL-DV484W(Z)
TINSZA032AWZZ
Advertisement
Table of Contents
