Sharp XL-DV60 Operation Manual

Sharp operation manual dvd micro system xl-dv60
Hide thumbs Also See for XL-DV60:
Table of Contents

Advertisement

DVD MICRO SYSTEM
MODEL
XL-DV60
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-DV60 DVD Micro System consisting of XL-DV60 (main unit), CP-
DV60F (front speakers) and CP-DV60SW (subwoofer).

Advertisement

Table of Contents
loading

Summary of Contents for Sharp XL-DV60

  • Page 1 Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-DV60 DVD Micro System consisting of XL-DV60 (main unit), CP- DV60F (front speakers) and CP-DV60SW (subwoofer).
  • Page 2: For Your Records

    SPECIAL NOTES XL-DV60 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3: Important Safety Instructions

    Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. XL-DV60...
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS XL-DV60 Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/...
  • Page 5 ! During operation, " " may be displayed on the screen. This means that the operations described in this manual are prohib- ited by the disc. XL-DV60 FM/AM loop antenna 1 (QANTL0009SJZZ) Video cable 1...
  • Page 6: Table Of Contents

    Contents XL-DV60 " General Information Precautions ......... . 7 Controls and indicators .
  • Page 7: Precautions

    Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of acci- dent causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
  • Page 8: Controls And Indicators

    Controls and indicators XL-DV60 10 11 " Front panel 1. Video/Auxiliary Button ......51 2.
  • Page 9: Rear Panel

    9. Optical Digital Audio Output Jack ....51 " Front speaker 1. Semi Dome Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire " Subwoofer 1. Sub Duct Pipe 2. Subwoofer 3. Speaker Wire XL-DV60 Reference page...
  • Page 10 Controls and indicators (continued) XL-DV60 " Remote control 1. Remote Control Transmitter ......19 2. DVD Setup Button ....... . 42 3.
  • Page 11: Description Of Discs

    Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. XL-DV60 0403E...
  • Page 12 Description of discs (continued) XL-DV60 " DVD-Video A popular type of DVD disc of the same size as a CD, mainly con- taining video images. Region number DVD discs are programmed with region numbers indicating countries in which they can be played. This system can play discs with region number "1"...
  • Page 13: Discs That Cannot Be Played

    ! You cannot play illegally produced discs. ! A disc with scratches or fingerprints may not play properly. Refer to "Care of discs" (page 54) and clean the disc. XL-DV60...
  • Page 14: System Connections

    System connections XL-DV60 Make sure to unplug the AC power cord before making any connections. FM/AM loop antenna connection (see page 15) FM antenna AM loop antenna Subwoofer Front speaker (right) Front speaker (left) TV connection AC outlet (see pages 16 - 17)
  • Page 15: Speaker Connection

    Black Caution: ! The supplied speakers are exclusively for the XL-DV60. Do not connect them to other equipment, and do not connect other speakers to the XL-DV60. It may cause malfunction. ! Use speakers with an impedance of 6 ohms or more, as lower im- pedance speakers can damage the unit.
  • Page 16 System connections (continued) XL-DV60 " Placing the speaker system Same distance Front speaker Front speaker (left) Notes: ! Place the TV halfway between the front speakers. ! The bass sound from the subwoofer is omni-directional, however, it is recommended to place it as close as left and right speakers.
  • Page 17 The conventional TV system displays 30 frames of still images per second to perform a series of movements (interlaced scanning). Whereas, progressive scanning displays one frame every 1/60th of a second (60 frames per second) to ensure less flickers and high- density images. XL-DV60...
  • Page 18: System Connections

    System connections (continued) XL-DV60 " Connecting the AC power cord After checking all the connections have been made correctly, con- nect the AC power cord to the AC power input jack, then plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.
  • Page 19: Remote Control

    Point the remote control directly at the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music. 8" - 20' (0.2 m - 6 m) battery XL-DV60 Remote sensor...
  • Page 20: General Control

    General control XL-DV60 " Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume.
  • Page 21: Setting The Clock

    To change the 12-hour or 24-hour display: Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 53 for details.] Perform "Setting the clock" from step 1. XL-DV60 ) button to ) button once to advance the time ) button to...
  • Page 22: Playing A Disc

    Playing a disc XL-DV60 Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2", etc. accordingly. Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button. Press the OPEN/CLOSE button to open the disc compartment.
  • Page 23 Compatibility of the progressive scan TV Some progressive scan TVs are not fully compatible with this prod- uct, which may cause image distortion. In this case, switch the vid- eo mode from "Progressive" to "Interlace" (see page 17). Pause indicator XL-DV60 Selected disc number...
  • Page 24: Playing A Disc

    Playing a disc (continued) XL-DV60 Caution: ! Do not place two discs in one disc tray. ! Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunc- tions. ! Do not push the disc compartment while it is moving.
  • Page 25: Basic Operation

    ! When a search is performed during DVD playback, pictures may not be forwarded or reversed in the search speed specified in this manual, depending on the disc or the scene being played. XL-DV60...
  • Page 26: To Start Playback From The Desired Point (Direct Play)

    Basic operation (continued) XL-DV60 " To start playback from the desired point (direct play) To select and play the desired title and chapter: While in the stop or playback mode, press the DIRECT but- ton. Within 10 seconds, select the title or chapter by pressing...
  • Page 27: Still Picture/Frame Advance

    While a disc is playing, press the STILL/PAUSE button. Hold down the button Slow Forward for 2 seconds or more. Slow Backward Slow Forward Press the (play) button to return to the normal playback. Note: On some discs, slow-motion play functions are disabled. XL-DV60...
  • Page 28: Useful Operation

    Useful operation XL-DV60 The subtitle language and the audio language you select during playback are reset each time you set this unit to the stand-by mode or change the disc. To keep your preferred languages, set them in the initial setting screen (see page 42).
  • Page 29: To Change The Subtitle Language

    See the disc jacket for details. ! If the disc you are using does not have a title menu, nothing appears on the screen. XL-DV60 TOP MENU...
  • Page 30: To Zoom In On An Image (Zoom)

    Useful operation (continued) XL-DV60 " To zoom in on an image (zoom) You can magnify images during playback. While a disc is playing, press Zoom x 1.5 the ZOOM/AUDIO button. Each press of the ZOOM button cycles through the zoom set- tings as follows: Zoom x 1.5...
  • Page 31: To Brighten An Image

    Within 10 seconds, press the cursor ( or ) button to set the level. Setting Level Setting Brighter Normal A lot brighter Slightly clearer To restore the original image quality: In step 2, select "OFF". XL-DV60 Level Setting Clearer A lot clearer...
  • Page 32: To Change The Display On Tv Screen

    Useful operation (continued) XL-DV60 " To change the display on TV screen You can display or hide the operation indicators on the TV screen. While the disc is playing, press the SHIFT button, and then press the MENU/OSD button. (The display is changed at each operation of these two buttons.)
  • Page 33: To Play Repeatedly (Repeat Play)

    ! If you press another button during the repeat play, the playback may be canceled. ! Repeat play is not possible during random play. ! When operating video CD with the P .B.C. function, set the P.B.C. to off (see page 35). XL-DV60 button. Other-...
  • Page 34: To Play The Contents Between The Specified Points Repeatedly (A-B Repeat)

    Useful operation (continued) XL-DV60 " To play the contents between the specified points repeatedly (A-B repeat) You can play the desired portion repeatedly by specifying it during playback. While the disc is playing, press the A-B button. TV screen On the unit A-B Set A This registers the start point (A).
  • Page 35: Playing A Video Cd

    MENU/OSD button to cancel the Play P.B.C. mode. Playback starts. Each time you press the button, the setting switches on and off. Note: Some video CDs with P .B.C. cannot be played back when the P.B.C. mode is off. XL-DV60 PBC off...
  • Page 36: Playing An Audio Cd

    Playing an audio CD XL-DV60 Playing a disc ........22 - 24 To locate the beginning of a chapter/track (skip) .
  • Page 37: To Play In The Desired Order (Programmed Playback)

    Track12 "Clear All" Deletes the program. Disc-2 Track8 Disc-3 Disc-4 "Exit" Turn off the programming screen. Disc-5 Note: On some discs, programmed play does not work. XL-DV60 PROGRAM LIST DISC No. INDEX Disc-2 Track2 Disc-3 Track12 Disc-4 Track8 PROGRAM LIST DISC No.
  • Page 38: Playing An Mp3 And Jpeg Disc

    Playing an MP3 and JPEG disc XL-DV60 Playing a disc ........22 - 24 To locate the beginning of a chapter/track (skip) .
  • Page 39: Zoom Function

    ) button. The image rotates as shown below. button : 90º rotation in a clockwise direction. Zoom 200 Pct button : 90º rotation in a counterclockwise direction. button : Vertical mirror image. button. button. button : Horizontal mirror image. XL-DV60...
  • Page 40: Listening To The Radio

    Listening to the radio XL-DV60 " Tuning Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING ( ) button to tune in to the desired station.
  • Page 41: To Scan The Preset Stations

    Press the ON/STAND-BY button to enter the stand-by mode. While pressing down the TUNER(BAND) button and the 2 but- ton, press the ON/STAND-BY button until "TUNER CL" appears. XL-DV60 ) button for more than 0.5 seconds. ) button again when the desired sta-...
  • Page 42: Changing The Initial Setting Of Dvd

    Changing the initial setting of DVD XL-DV60 After pressing the button, press the SET UP button. Press the cursor ( Language button to select the main Setup menu and press the ENTER button. Audio Setup Video Setup Display Setup System Setup...
  • Page 43 Set to on to enjoy the realistic sound as recorded on the disc. Realistic sound is produced as recorded on DVD/video CD/audio CD. Off: The range of signal levels is reduced to moder- ate sudden increase in playback volume. XL-DV60 Reference page P. 46 P. 46 P. 46 P. 46...
  • Page 44 Changing the initial setting of DVD (continued) XL-DV60 Setting Selectable parameters (* indicates initial settings.) Video Setup TV screen TV type Video output Picture mode Description 4:3 PS* The screen mode should be set according to the connected 4:3 LB TV type.
  • Page 45 Off: Cancel the closed caption setting. Sets a restriction level for DVD viewing. Password setting. This resets all settings, except for "Rating Level" and "Pass- word", to the factory defaults. XL-DV60 Reference page P. 29 P. 47 P. 47 P. 47...
  • Page 46: Video Format

    Changing the initial setting of DVD (continued) XL-DV60 " Language Indicator Setting OSD Lan- A language for screen display can be set, such as for guage initial settings or messages. English Close Audio A language for audio can be set.
  • Page 47: To Change The Password

    Enter 2486 with the direct buttons and then press the ENTER but- ton. When reset is done according to this method, all settings, includ- ing the settings for password and rating level, will be reset to the factory defaults. XL-DV60...
  • Page 48: Timer And Sleep Operation

    Timer and sleep operation XL-DV60 Timer playback: The unit turns on and plays the desired source (DVD, video CD, audio CD, MP3 disc, tuner) at the preset time. Sleep operation: You can set the system to the power stand-by mode at the specified time.
  • Page 49 At this time, only this unit will be turned on or enter the power stand-by mode automatical- ly. It will enter the power stand-by mode 1 hour after the playback starts. However, the other unit will not be turned on or off. XL-DV60...
  • Page 50: Radio

    Timer and sleep operation (continued) XL-DV60 " Sleep operation Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed and then within 8 seconds, press the MEMORY/ SET button. To change the sleep time: While the sleep time is displayed, press the PRESET ( button.
  • Page 51: Enhancing Your System

    ! Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms. ! Plugging in the headphones disconnects the speakers automati- cally. Adjust the volume using the VOLUME control. XL-DV60...
  • Page 52: Troubleshooting Chart

    XL-DV60 Many potential problems can be resolved by the owner without call- ing a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. " General Symptom Possible cause ! Did a power failure occur? Reset the clock.
  • Page 53: Error Indicators And Warnings

    Disc Error rect way. The region number of the DVD is not "1" or "ALL". Wrong Region The disc does not support the oper- ation described in this operation manual. XL-DV60 2 button,...
  • Page 54: Maintenance

    Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification fig- ures indicated are nominal values of production units.
  • Page 55: Dvd Player

    Subwoofer system (magnetic shield) 5-1/8" (13 cm) woofer Maximum input 90 W power Rated input power 45 W Impedance 6 ohms Dimensions Width: 6-5/16" (160 mm) Height: 9-7/16" (240 mm) Depth: 11-1/4" (285 mm) Weight 7.3 lbs. (3.3 kg) XL-DV60...
  • Page 56: Consumer Limited Warranty

    Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.

Table of Contents