Table of Contents
Advertisement
Timer and sleep operation (continued)
1
12
When the preset time is reached, playback or recording will
2
start.
In the timer playback mode, the volume will increase gradually until it
reaches the volume you were listening to before your system entered
3
the timer stand-by mode.
13
When the timer end time is reached, the system will enter
4
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
5
Daily timer:
The timer will operate at the same time every day. It will continue until
the daily timer setting is cancelled. Cancel the daily timer when it is not
6
used.
Note:
7
When performing timer playback or recording using another unit connected
to the VIDEO/AUX IN sockets, select "VIDEO" in step 9. This unit will turn on
or enter the power stand-by mode automatically, however, the connected
8
unit will not turn on or off.
9
10
*DV484W_EP62-67
64
Checking the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE"
or "DAILY", and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE
CAL" or "DAILY CAL", and press the MEMORY/SET button.
The unit returns to the timer stand-by mode after displaying the settings in
order.
Cancelling the timer setting in the timer stand-by mode:
1. Press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE"
or "DAILY", and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE
OFF" or "DAILY OFF", and press the MEMORY/SET button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the same
setting, perform the following operations.
1. Turn the power on and press the CLOCK/TIMER button.
2. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE"
or "DAILY", and press the MEMORY/SET button.
3. Within 10 seconds, press the 5 3 or 2 4 button to select "ONCE
ON" or "DAILY ON", and press the MEMORY/SET button.
4. Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
The timer can also be set with the remote control.
04.2.20, 17:28
XL-DV484W(Z)
TINSZA032AWZZ
XL-DV484W
XL-DV555W
ENGLISH
4
E-64
Advertisement
Table of Contents
