Sharp XL-DV484W Operation Manual page 28

XL-DV484W
Parental setting (continued)
XL-DV555W
ENGLISH
Setting the parental level for the first time
H
1
Whilst a disc is stopped, press the SET UP button whilst pressing
down the SHIFT button to display the setup screen.
2
Use the cursor ▲ or ▼ button to
select the " PARENTAL SETUP".
3
Press the ENTER button to display the password specification screen.
4
Use the 0 - 9 buttons to enter a 4-digit password.
5
Press the ENTER button to select level.
6
Use the cursor 1, 0, ▲ or ▼ button to change the parental level.
Then press the ENTER button.
I Level 1: for most restrictive viewing
Level 8: for adult viewing
(The smaller the number, the
greater the level of restriction.)
I When the parental level is set to
"OFF", DVDs can be played back
regardless of the parental level.
E-25
*DV484W_EP22-26 25
7
Press the cursor ▼ button to select "CODE", then press ENTER and
then use the cursor 1, 0, ▲ or ▼ button to select the desired country
code (see page 24).
8
Press the ENTER button to confirm the setting.
To exit the setup screen and return to the startup screen, press the SET
UP button whilst pressing down the SHIFT button or the RETURN button.
Caution:
Play back the disc to confirm that the parental level setting is correct. If not
change the country code.
Notes:
I You must input the correct password to make any changes in the parental level.
Be sure to keep a separate record of your password somewhere for later reference.
I Some DVDs allow the viewer to temporarily change the parental level setting to
view the original scenes. When this prompt appears, enter the password to view the
original scenes.
I You cannot open the setup screen whilst a playback operation is in progress. If a
disc is playing, stop playback first.
Changing the parental level
H
1
P A R E N T A L Whilst a disc is stopped, press the SET UP button whilst pressing
P A S S W O R D
down the SHIFT button to display the setup screen.
- - - -
P A S S W O R D
L E V E L O F F
2
Use the cursor ▲ or ▼ button to select the "
C O D E C H I N A
3
Press the ENTER button to display the password verification screen.
4
Use the 0 - 9 buttons to enter the 4-digit password that was set previously.
If you enter the wrong number three times in succession, the normal
screen reappears.
If you forget your password, you can erase your current password
by pressing
5
Press the ENTER button to select level.
P A R E N T A L
Use the cursor 1, 0, ▲ or ▼ button to change the parental level.
L E V E L 1 L E V E L 5
6
L E V E L 2 L E V E L 6
Press the cursor ▼ button to select "CODE", then press ENTER and
L E V E L 3 L E V E L 7
then use the cursor 1, 0, ▲ or ▼ button to select the desired country
L E V E L 4 L E V E L 8
O F F
code (see page 24).
SELECT
ENTER RETURN
ENTER 7
Press the ENTER button to confirm the setting.
To exit the setup screen and return to the startup screen, press the SET
UP button whilst pressing down the SHIFT button or the RETURN button.
04.2.20, 17:22
XL-DV484W(Z)
TINSZA032AWZZ
PARENTAL SETUP".
button four times.