9.9
Gamma correction
The gamma correction is the gamma = 1.0 or the gamma table control.
GenICam parameters
GammaMode
ReloadGammaData
Gamma table loading procedure (ReloadGammaData)
1. Executes ReloadGammaData.
Gamma table writing
It is necessary to use the virtual com port communication (eBUS SDK: PvSerialPort class) to write the gamma table to
the camera. The gamma table cannot write the camera with GenICam parameter.
Please refer the other document for the details of the gamma table writing.
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Enumeration
Gamma correction selection
type
Gamma = 1.0 (Off), Gamm table control (On). Default: Gamma = 1.0
Command type
Gamma table loading from ROM to RAM
No.16S019-05
48/62