Installation - opti-solar Sp4000 Premium User Manual

4. Installation

4-1. Selecting Mounting Location
Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction materials.
Mount on a solid surface
This inverter can make noises which may be a nuisance in a living area during
operation.
Install this inverter at eye level to facilitate the readability of LCD display at all
times.
For proper air circulation to dissipate heat, ensure a clearance of approx. 20 cm to
the side and approx. 50 cm above and below the unit.
Dusty conditions on the unit may impair the performance of this inverter.
The ambient temperature should be between 0°C and 40°C and relative humidity
should be between 5% and 85% to ensure optimal operation.
The recommended installation position is to be adhered to the vertical.
For proper operation of this inverter, please use appropriate cables for grid
connection.
The pollution degree of the inverter is PD2. Select an appropriate mounting
location. Install the solar inverter in a protected area where is dry, free of
excessive dust and has adequate air flow. Do NOT operate it where the
temperature and humidity is beyond the specific limits. (Please check the specs for
the limitations.)
Installation position shall not prevent access to the disconnection means.
This inverter is designed with IP20 standard and it's for indoor applications only.
Regularly clean the fan filter.
4-2. Mounting Unit
WARNING!! Remember that this inverter is heavy! Please be careful when lifting it
out from the package.
Installation to the wall should be carried out with the proper screws. Under this
condition, the device should be bolted on securely.
The inverter can only be used in a CLOSED ELECTRICAL OPERATING AREA. Only service
person can enter this area.
WARNING!! FIRE HAZARD.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE
ONLY.
5