Testing And Connecting The Printer; Plugging In The Printer - Epson AcuLaser C2000 Setup Manual

5

Testing and Connecting the Printer

This chapter provides you with the necessary instructions to test
that the printer is correctly set up for use with a computer. You
will also find information on how to connect the printer to your
computer.

Plugging in the Printer

Follow these steps to connect the printer to an electrical outlet:
1. Check the label on the left side of the printer to make sure that
the voltage required by the printer matches that of the
electrical outlet it will be plugged into. Also, make sure that
you have the correct power cord for your power source.
c
46
Testing and Connecting the Printer
Caution:
It is not possible to change the printer's voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.