Epson AcuLaser C2000 Setup Manual page 11

If you are unable to insert the AC plug into the electrical
outlet, contact an electrician.
Do not put your printer where the cord will be stepped on.
Avoid using outlets that other appliances are plugged into.
When using an extension cord, be careful not to exceed its
recommended amperage limit. Also, be sure that all items
plugged into the electrical outlet do not exceed a total of 15
amperes.
Never push objects of any kind through cabinet slots as they
may touch dangerous voltage points or short out parts that
could result in fire or electric shock.
Never spill liquid of any kind onto the printer.
Unless specifically instructed in this guide, do not attempt to
service this product yourself. Opening or removing those
covers that are marked Do Not Remove may expose you to
dangerous voltage points or other risks. Refer all servicing in
those compartments to a qualified service representative.
Unplug the printer and refer servicing to a qualified service
representative under the following conditions:
A. If liquid has entered the printer.
B. If the printer has been exposed to rain or water.
C. If the printer does not operate normally or exhibits a
distinct change in performance.
D. If the printer has been dropped or the cabinet damaged.
E. When the power cord or plug is damaged or frayed.
Safety Instructions
5