Testing And Connecting The Printer; Plugging In The Printer - Epson EPL-N2050+ Setup Manual
Hide thumbs
Also See for EPL-N2050+:
- Brochure & specs (24 pages) ,
- User manual (260 pages) ,
- Service manual (160 pages)
Table of Contents
Advertisement
4
Testing and Connecting the Printer
Plugging in the Printer
1. Make sure the power switch on the front of the printer is
turned off, as shown below.
2. Insert the power cord into the AC inlet at the back of the
printer. Then plug the other end into a properly grounded
electrical outlet.
c
Caution:
36
Testing and Connecting the Printer
Avoid using electrical outlets that other appliances are
plugged into.
Only use electrical outlets that meet the power requirements
for this printer.
Advertisement
Table of Contents
