Yamaha YXZ 1000R SS Owner's Manual page 92

YXZ10YEXJ
4 (b)
1
1. Low speed compression damping force adjusting screw
YXZ10YESJ
(b)
1. Low speed compression damping force adjusting screw
(a)
(a)
1
Low speed compression damping setting
Minimum (soft):
4 turn(s) out from the fully turned in posi-
tion
Standard:
1 1/2 (YXZ10YEXJ)
2 (YXZ10YESJ) turn(s) out from the fully
turned in position
Maximum (hard):
Adjusting screw fully turned in
EWB03500
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
 Do not tamper with or attempt to open
the cylinder assemblies.
 Do not subject the shock absorber as-
sembly to an open flame or other high
heat source. This may cause the unit to
explode due to excessive gas pressure.
4-54