Yamaha YXZ 1000R SS Owner's Manual page 56

 The tachometer needle will start over at
7000 r/min after 12000 r/min.
1. Push the "RESET" button to select the
desired engine speed for activating the
indicator light.
2. Push the "MODE" button to confirm the
4
selected engine speed. The shift timing
indicator light flashes and the tachometer
shows the current setting r/min for the
deactivation point.
To set the deactivation point
TIP
 The shift timing indicator light deactivation
point can be set between 7000 r/min and
12000 r/min. The deactivation point can be
set in increments of 500 r/min.
 Be sure to set the deactivation point to a
higher engine speed than for the activation
point, otherwise the shift timing indicator
light will not come on.
 The tachometer needle will start over at
7000 r/min after 12000 r/min.
1. Push the "RESET" button to select the
desired engine speed for deactivating the
indicator light.
2. Push the "MODE" button to confirm the
selected engine speed. The display exits
the shift light control mode and returns to
the standard multi-function display mo-
de.
4-18