Yamaha YXZ 1000R SS Owner's Manual page 198

2
1
1. Battery holding plate
2. Bolt
4. Disconnect the negative battery lead first,
then the positive battery lead by remov-
8
ing their bolt. NOTICE: When removing
the battery, the main switch must be
off, and the negative lead must be dis-
connected before the positive lead.
[ECB01002]
2
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Battery
5. Pull the battery out of its compartment.
To charge the battery
 Remove it from vehicle and confirm the rec-
ommended charging rate as specified on
the battery itself.
 Select a suitable charger and follow the
manufacturer's instructions, or have a
Yamaha dealer charge it for you.
8-59
3
2
1