3. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Tightening torque:
4
Locknut:
41 N·m (4.1 kgf·m, 30 lb·ft)
2
1
1. Special tool
2. Torque wrench
3. Crossover locknut
90˚
3
Rebound damping force (YXZ10YEXJ)
Turn the rebound damping force adjusting
screw in direction (a) to increase the rebound
damping force and thereby harden the damp-
ing, and in direction (b) to decrease the re-
bound damping force and thereby soften the
damping.
(b)
1. Rebound damping force adjusting screw
4-50
(a)
1