Yamaha YXZ 1000R SS Owner's Manual page 51

Clock, hour meter, voltage display and
coolant temperature display
1. Clock/Hour meter/Voltage display/Coolant temperature
display
2. "SELECT" button
3. "RESET" button
4. "MODE" button
The clock displays time in 12-hour format.
The hour meter shows the total time the en-
gine has been running.
The voltage display shows the battery volt-
age.
The coolant temperature display shows the
temperature of the coolant.
1 2 3 4
Push the "MODE" button to switch between
the clock "CLOCK", the hour meter "HOUR",
the voltage display "VOLTAGE", and the
coolant temperature display in the following
order:
CLOCK → HOUR → VOLTAGE → coolant
temperature → CLOCK
To set the clock
1. Set the display to the clock.
2. Push both the "SELECT" button and
"RESET" button for three seconds. The
hour digits will start flashing.
3. Push the "RESET" button to set the
hours.
4. Push the "SELECT" button, and the mi-
nute digits will start flashing.
5. Push the "RESET" button to set the minu-
tes.
6. Push the "SELECT" button, and then re-
lease it to start the clock.
4-13
4