Yamaha YXZ 1000R SS Owner's Manual page 183

2. Remove the tailpipe bolts.
1
1. Tailpipe bolt
3. Remove the tailpipe by pulling it out of
the muffler, and then remove the gasket.
4. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe and inside of the tailpipe housing.
1
1
1. Gasket
2. Spark arrester
3. Tailpipe
5. Install the gasket, and then insert the tail-
pipe into the muffler and align the bolt
holes.
6. Install the tailpipe bolts and tighten them
to the specified torque.
Tightening torque:
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
7. Install the tailpipe cover.
8-44
2
3
8