1. Engine oil drain bolt
2. Gasket
3. "
" mark
TIP
A "
" mark is stamped on the crankcase
near the engine oil drain bolt.
10. Install the engine oil drain bolt with new
gasket, the oil tank drain bolt with new
gasket, and then tighten the bolts to the
specified torques.
Tightening torques:
3
Engine oil drain bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Engine oil tank drain bolt:
16 N·m (1.6 kgf·m, 12 lb·ft)
2
11. Add 2.00 L (2.11 US qt, 1.76 Imp.qt) of
the recommended engine oil to the oil
tank.
1
12. Check the O-ring for damage, and re-
place it if necessary.
8-20
8