Table of Contents
Advertisement
6.
Rotate the platen knob in the relevant direction and pull the cut sheet out from the
top of the printer.
7.
If a paper fragment remains inside the printer:
(a)
use tweezers to grip and extract it or
(b)
insert a triple folded shee t from the P aper Tray and turn the platen knob to pass
the folded sheet through and push out the paper fragment.
8.
When the paper jams are cleared, replace the ribbon cartridge, reset the paper
thickness lever and close the printer top cover.
9.
Set the Power Switch to ON.
NOTE
Use the above procedure to clear paper jam when using cut-sheet front feed.
C
ONTINUOUS FORMS JAMMED IN PRINTER
Do not carry out any operations inside the printer with the Power
Switch set to ON.
1.
Set the Power Switch to OFF.
2.
Open the Top Cover.
3.
Tear off any unprinted continuous forms.
WARNING!
Troubleshooting > 60
Advertisement
Table of Contents
