Table of Contents
Advertisement
R
EMOVING CONTINUOUS FORMS
1.
Tear off the continuous forms.
2.
Press the LOAD/EJECT button to move the front edge of the continuous forms
backwards to the Pin Tractors.
NOTE
>
The printer switches to off line mode.
>
The ALARM indicator illuminates to indicate there is no paper present.
>
If sprocket holes of the last page of the forms disengage from the
sprocket pins, do not attempt to eject the paper to avoid the possibility of
a paper jam.
3.
Lift the Pin Tractor covers (1) and remove the forms.
4.
Close the Pin Tractor covers.
See "Tearing off continuous forms" on page 26.
1
Paper handling > 27
Advertisement
Table of Contents
