Table of Contents
Advertisement
SWITCH
TEAR + LF/FF
PRINT QUALITY + SEL
PRINT QUALITY + LF/
FF
CHR.PITCH + PRINT
SPEED
S
ETTING MENU VALUES
The following information explains the printer settings and how you can change them.
Printer items and their values are printed for reference.
C
ONFIRMING CURRENT SETTINGS
To print the c urrent menu settings, use a cut sh eet of A4 paper or continuous forms of w i dth
at least 254 mm. In this example, two sheets of A4 paper is used.
1.
Set the Paper Type lever to cut sheet mode.
2.
To activate menu mode:
(a)
Ensure that the printer is powered ON.
(b)
Place the cut sheet on the front Paper Tray.
The cut sheet is gripped by the printer.
(c)
Press and hold down the CHR PITCH button and then the PRINT SPEED button
to enter menu mode, Menu print? is printed.
3.
Press PRINT QUALITY (PRINT) button and the printer prints out all the menu items
currently selected and their corresponding settings.
4.
Exit or proceed to change menu settings:
(a)
To exit menu setti n gs confirmation, save the current settings, press CHR PITCH
and PRINT SPEED buttons together. Save menu is printed.
Press LOAD/EJECT button to eject the cut sheet paper.
(b)
To change the menu settings, see
STATUS
On-line/Off-line
ML5720/ML5721
ML5790/ML5791
On-line/Off-line
ML5720/ML5721
ML5790/ML5791
On-line/Off-line
ML5720/ML5721
ML5790/ML5791
On-line/Off-line
"Menu setting" on page
Operating instructions > 40
FUNCTION
Performs microfeed (reverse) 1/144 inch
when paper is in tear off position.
Performs microfeed (reverse) 1/180 inch
when paper is in tear off position.
Performs microfeed (reverse) 1/144 inch
when paper is in Top of Form position.
Performs microfeed (reverse) 1/180 inch
when paper is in Top of Form position.
Performs microfeed (forward) 1/144 inch
when paper is in Top of Form position.
Performs microfeed (forward) 1/180 inch
when paper is in Top of Form position.
Enters menu mode.
41.
Advertisement
Table of Contents
