L
OADING PAPER
L
OADING CONTINUOUS FORMS
We recommend the rear-feed path for printing reports, etc., on single-thickness,
continuous-form paper. For graphics or charts, it's best to use the single-sheet path (top
feed).
NOTE
If you have paper in the paper path, be sure to remove it before installing
rear-feed paper.
Tractor terms
1.
Move the paper lever to the position marked "REAR."
2.
Grasp the paper separator, lift it slightly, pull back on it, then swing it forward.
(R
EAR FEED
1
2
3
Loading paper > 15
)
1. Pins
2. Lock lever
3. Tractor cover