Oki ML5721 User Manual page 25

6. Open the left and right Pin Tractor covers and feed the continuous forms in the
direction of the arrow, locating the sprocket holes in the forms onto the sprocket
pins.
NOTE
Ensure that paper is fed straight into the printer to avoid the possibility of
skew printing, irregular line feeding and paper jam.
7. Ensure that the forms are properly aligned on the sprocket pins, then close the Pin
Tractor covers.
8.
Adjust the right Pin Tractor to accommodate the width of the continuous forms,
taking care that the forms are held neither too loosely nor too tightly between the
Pin Tractors. Press the locking lever down to lock the right Pin Tractor in the desired
position.
9.
Attach the front cover back in position and close the front cover.
10.
Press the LOAD/EJECT button. The continuous forms will be taken into the printer
and positioned at the first line print position and the SEL indicator will illuminate.
NOTE
When loading a specific type of continuous media using the Front Feed, if you
encounter paper jam, erratic line spacing or misalignment between the sheets
of the multi-part paper due to the paper crumpling at the perforations and
varying binding strength, use the optional pull tractor (bottom feed) to load
this type of media.
Dismounting the front pin tractor
To dismount:
1.
Ensure that the printer is turned OFF.
2. Hold the Pin Tractor by its tabs on both sides.
Paper handling > 25